12-47. When writing the script to accompany  a  taped  or  filmed  news release,  you  should  observe  which of the following practices? 1₀ Use the pictures to supplement the  narration 2. Let  the  narration  supplement the  picture 3. Never  include  in  the  narration details that are presented by the  picture 4. Never  include  in  the  narration details  not  presented  by  the picture 12-48. In  marking  broadcast  copy,  the single slash mark (/) tells you to do which of the following actions? 1. Make a full stop and take a big  breath 2. Pause and take a short breath 3. Pause  for  emphasis,  take  no breath 4. Read  the  next  passage carefully due to tricky pronunciation 12-49. When there are a lot of stumbles in your delivery, which of the following  is  the  most  likely cause? 1. Vision  problems 2. The brain getting ahead of the mouth 3. Lack of practice with the copy 4. Lack  of  concentration  skills 12-50. Which of the following types of production music is used to set the mood for the production? 1. Fill 2. Background 3. Theme 4. Bridge 12–51. 12–52. 12-53. 12–54. 12-55. 12–56. Which of the following production concepts  allows  the  broadcaster  to adapt the vocal mood to the mood created  by  the  other  elements  in the  production? 1. Beginning  to  end 2. Prerecorded   voice 3. Prerecorded  music and sound effects 4. Segmenting Which control on the audio console should  NEVER  be  adjusted  by  studio announcers? 1. 2. 3. 4. In AFRTS/Network selector button Output selector button Audition/Program  master  gain control Monitor  selection  switch which of the following production  phases  should  you review  the  script  for  unfamiliar words or names? 1. Preproduction 2. Production 3. Postproduction Which of the following types of  special  effects  adds  depth to sounds and is used to enhance the  voice? 1. Filtering 2. Equalization 3. Reverb 4. Phasing Which of the following components is the heart of the TV system? 1. Control room 2. CCU 3. Camera 4. VCR What causes “snow” on a  TV picture? 1. Too little light on the subject 2. A camera that needs adjusting 3. A CCU out of sync with the camera it is mated with 4. Low signal strength on the cable 83