• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Assignment Questions - 14209_423
Assignment Questions - 14209_425

Photography (Basic) - Introduction to photography and other graphic techniques
Page Navigation
  396    397    398    399    400  401  402    403    404    405    406  
Learning  Objective: Recognize various  functions  of  a  view camera. 3-64. Of the following types of cameras, which  one  provides  movements  and adjustments  that  permit  distortion correction? 1. Single-lens  reflex 2. Twin-lens  reflex 3. View 4. Direct-vision   viewfinder 3-65. View cameras have all but which of the  following  parts? 1. Monorail 2. Bellows 3. Ground  glass 4. Viewfinder VIEW  CAMERA  CONTROL A. Front swing B. Rear swing C. Front tilt D. Rear tilt E. Rising  and  falling  front F. Sliding  front G. Sliding rear Figure 3C IN  ANSWERING  QUESTIONS  3-66  THROUGH 3-71, REFER TO FIGURE 3C AND SELECT THE  VIEW-CAMERA  CONTROL  THAT  PROVIDES THE CORRECTION USED AS THE QUESTION. 3-66. Centers the image vertically: 1. C 2. D 3. E 4. F 3-67. 3-68. 3-69. 3-70. 3-71. 3-72. 3-73. Centers the image horizontally: 1. A 2. C 3. E 4. G Controls  distortion  of  the  vertical plane: 1. B 2. D 3. E 4. G Controls  distortion  of  the horizontal plane: 1. B 2. D 3. F 4. G Increases depth of field of the horizontal plane: 1. A 2. C 3. E 4. F Increases depth of field of the vertical plane: 1. A 2. C 3. E 4. G When you are initially setting up the view camera,   all controls are lined up and no corrective movements are set. What is this position  called? 1. Set up 2. Initial 3. Neutral 4. Starting What total number of vertical or horizontal  planes  can  be  corrected with a view camera? 1. One 2. Two 3. Three 4. Four 24







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.